0.015uf 310v X2 Safety Capacitor Anti-Interference Capacitor Self-Healing Property
The full name of X capacitor is generally called: X2 (X1/X3/MKP) capacitor for suppressing power supply electromagnetic interference. Generally, the main functions in the circuit are: power supply cross-line circuit, EMI filtering, spark elimination circuit, etc. to ensure that the finished electronic products meet the EMC requirements.
Products Introduction
MPX are winded with metallized polypropylene film dielectric,Non-inductive construction, tinned copper wire leads,and flame retardant epoxy resin coating. They have excellent features of self-healing and good flame retardant according to UL 94-V0
Type application
The Products Would widely used for the Interference suppressors and across-the-line capacitor applications.Suitable for used in situations where failure of the capacitor will not lead to danger of electric shock.
Features
1 Non-induction construction
2 High moisture-resistance
3 Self-healing property
4 Flame retardant type(compliance with UL 94V-0)
5 Very small loss
6 Excellent frequency and temperature characteristics
7 High insulation resistance
Specifications(IEC 60384-14)
| Test items |
Performance requirements |
Conditions of test |
| Capacitance |
Within the tolerance specified |
1KHz, 1Vrms Max. at 25℃ |
| Dissipation Factor |
0.001 (0.1%) Max. |
1KHz, 1Vrms Max. at 25℃ |
| Voltage proof |
Shall be no abnormality |
Between terminals 4.3UR (Vdc) Test of 60sec. |
| Between terminal and enclosure UR×200％+1500Vac, 60sec. |
| Insulation resistance |
CR ≤ 0.33μF IR ≥ 15,000MΩ CR >0.33μF IR ≥6,000s |
100±15Vdc, 60sec / 25℃ |
| Robustness of terminations |
No wire breakage and no damage of capacitor |
Tense Strength of Terminal Load Force : 1.0 Kg
Holding Time : 10 ± 1sec
|
|
Bending Strength of Terminal Load Force : 0.5 Kg
Bending Time : 4 x 90 ﾟ
|
| Resistance to soldering heat |
(1) Appearance : No visible damage
(2) △C/C : ≤ ±5% of the initial value
|
Solder temperature: 260±5℃
Solder time: 5±0.5sec
|
| Solderability |
95% of the surface tinning |
Solder temperature: 260±5℃
Solder time: 2±0.5sec
|
| Rapid change of temperature |
The capacitors shall be visually examined and there shall be no visible damage. |
Lower category temperature: -40℃
Upper category temperature: 110℃
Number of cycles: 5
Duration t1 = 30 min
|
| Vibration |
The capacitors shall be visually examined and there shall be no visible damage |
Frequency range: 10~55Hz
Course: X,Y,Z (axis)
2h / axis ( 6h in total)
Displacement amplitude: 0.75mm
|
| Test items |
Performance requirements |
Conditions of test |
| Climatic sequence |
(1) Appearance : No visible damage
(2) △C/C : ≤ ±5% of the initial value
(3) DF ( tanδ) : ≤ 0.008 of increased value
(4) IR : ≥ 50% of the applicable limits
(5) Voltage proof : Normal
|
Dry Heat
Upper Temperature: 110℃
Lower Duration: 16Hrs
|
|
Cold
Temperature: -40℃
Duration: 2Hrs
|
| Damp Heat Steady State |
(1) Appearance : No visible damage
(2) △C/C : ≤ ±5% of the Initial value
(3) DF ( tanδ) : ≤ 0.008 of increased value
(4) IR : ≥ 50% of the applicable limits
(5) Voltage proof : Normal
|
+40°C and 93% RH, 56 days |
| Charge and discharge |
(1) Appearance : No visible damage
(2) △C/C : ≤ ±10% of the initial value
(3) DF ( tanδ) : ≤ 0.008 of increased value
(4) IR : ≥ 50% of the applicable limits
|
Test voltage : √2 x URVAC 50 Hz
Charge and discharge: 0.5sec/time
Repeated for 10000 cycles
|
| Endurance |
(1) Appearance : No Visible Damage
(2) △C/C : ≤ ±10% of the initial value
(3) DF ( tanδ) : ≤ 0.008 of increased value
(4) IR : ≥ 50% of the applicable limits
|
1.25 x UR VAC 50 Hz, once every hour
increase to 1,000VAC for 0.1 second,
1,000 hours at upper rated temperature
|
Product Tags:
|
|
Anti Interference X2 Safety Capacitor 0.015 UF with Self Healing Property Images
|
